No surprises here, which is good news for players who like using this string
Blog for Badminton stringer(s).
I have been restringing for over 15years and learnt the craft from my flatmate in New Zealand, who learnt it from his father - an ex-district player in Malaysia.
UPDATE - Comments can now be added without moderation
horzt1
horz1
Friday, June 1, 2018
Tuesday, May 1, 2018
Salvaging handle from broken racquet
Saw a broken Yonex racquet at one of the badminton halls I frequent - handle and shaft was in good condition, just a broken frame. Though not frequent, I do hear of accounts whereby the handle actually broke during usage. Hence decide to give salvaging the handle from the latter a go.
Ok, tool required are as per in the pix.
1. Power drill with correct drill bit size(depends on the shaft on the handle)
2. Pliers with cutting edge at the rear of the teeth or small burner
3. Pressurised air blower (for computers)
![]() |
| Tools required |
First step is to cut away the shaft at the end of handle. You can use the cutting area on the pliers to do so. I used the small burner to heat it 1st before cutting - to soften the shaft 1st (turn out not necessary to do so).
Once done, you will to determine the proper drill bit size to use - 5mm for myself. Please note there are several types of drill bits - for wood, concrete or general purpose. I found the GP version worked well for my case.
Before drilling, please ensure you have something to hold the handle firmly in-place. Otherwise you may risk injuring yourself.
As you drill, blackish material will appear from the activity. If you see wooden bits, you are either drilling at the WRONG angle or have drilled too far into the handle. I had to stop to clear the debris twice till reaching the maximum length of the drill bit.FInally used the pressured air to clear any remaining dust from the newly formed hole on the handle.
![]() |
| Final result |
Monday, April 2, 2018
Thursday, March 1, 2018
Yonex classification of 2018 racquets for skill level
Discovered the following Yonex chart while trolling the net.
Thursday, February 1, 2018
Overstretched badminton strings
I am high-lighting this concern due to a recent incident by a friend.
He is one with the adamant belief that badminton strings should not move AT ALL after a restring and will have MAXIMUM repulsion as well as durability aka philosophy of "good, fast and cheap" in a different guise???
He made such a request to his usual stringer (not me) for tension of 24lb and that the string must not move at all during usage ... his wish came true and upon every hit of the shuttle - only goes to midcourt and sounds like he was playing with a wooden plank upon every hitπ!!!
Reason is because for the badminton string to have repulsion, it must not have been overstretched eg still able to stretch and shrink back to it's original shape - exactly like a spring. Otherwise you should request to use steel wire instead of string!
So be careful what you wish for, you may just get itπ
He is one with the adamant belief that badminton strings should not move AT ALL after a restring and will have MAXIMUM repulsion as well as durability aka philosophy of "good, fast and cheap" in a different guise???
He made such a request to his usual stringer (not me) for tension of 24lb and that the string must not move at all during usage ... his wish came true and upon every hit of the shuttle - only goes to midcourt and sounds like he was playing with a wooden plank upon every hitπ!!!
Reason is because for the badminton string to have repulsion, it must not have been overstretched eg still able to stretch and shrink back to it's original shape - exactly like a spring. Otherwise you should request to use steel wire instead of string!
So be careful what you wish for, you may just get itπ
Tuesday, January 2, 2018
String diameter verification (aka SDV) - Japan only issue Yonex BG66 Maxima
Good news here since it's suppose to have been their primo stuff... unfortunately I have discovered not all strings with a declaration of Made in Japan to be up to spec - will reveal in the following months.
BG66 Maxima is currently no longer in production. If you are lucky enough to locate any, they would cost an arm&leg!
BG66 Maxima is currently no longer in production. If you are lucky enough to locate any, they would cost an arm&leg!
Sunday, December 10, 2017
Digital Calipher Vernier (to 2-decimal point) - for verifying string thickness
Finally managed to obtain a reasonable cost digital calipher vernier which was accurate to 2-decimal points. Purchased it during the Black Friday sales.
The LR44 battery was pre-loaded. Now to test for accuracy and if it was functional:-
1. Switch it on and set units to millimeter.
2. Slide the jaws to the minimum gently and press the ZERO button to calibrate it accordingly.
3. Next I slide the caliper jaws open until the display showed 5.00mm - not as easy as it seems due to the 2-decimal point accuracy.
4. Then I place it next to a ruler for comparison - ruler in centimeters (but was placed up-side downπ)
As such I was not going to return it πππ
![]() |
| As per received |
The LR44 battery was pre-loaded. Now to test for accuracy and if it was functional:-
1. Switch it on and set units to millimeter.
2. Slide the jaws to the minimum gently and press the ZERO button to calibrate it accordingly.
3. Next I slide the caliper jaws open until the display showed 5.00mm - not as easy as it seems due to the 2-decimal point accuracy.
4. Then I place it next to a ruler for comparison - ruler in centimeters (but was placed up-side downπ)
![]() |
| Works as advertised! |
![]() |
| Close-up of the ruler and caliper jaws |
Subscribe to:
Posts (Atom)








